Cutting: a cut above the rest

Tube Cutting Expertise

• All types of tubing, shapes and materials
• "Burr-free" parts to exact tolerances
• End/surface finishes to spec
• .010" to 6" diameter tubes with various wall thicknesses
• All types of end finishes and radii
• Prototypes to production runs
• Cut tolerances as tight as ± .002"
• Micro-part cutting technology

Supported Shear Tube Cut-Off

• Shears burr-free parts to tight tolerances with no scrap between cut parts
• Production rates are thousands of parts per hour, since cut parts roll off the machine ready for shipping
  
• Outside diameters up to 7 inches
  
• Lengths as short as .040" long up to 24" inches long
  
• Standard length tolerances of ± .005 thousandths of an inch
  
• Wall thicknesses range from .010" to inches thick
  
• Speed, accuracy, reliability

Saw and Lathe Cutting Operations

• Micro parts as small as .010" OD to large diameter
• Tubing to 5.250" OD
  
• Lengths up to 24.000" long. If you require longer parts, call our engineering department to discuss your part specifications
  
• Angle cuts to your specifications

Secondary Operations

• Tumble deburring
  
• End finishing with standard length tolerances as tight as ± .002 thousandths of an inch
  
• Chamfering the OD and ID or adding a precise radius
  
• Vibratory cleaning
  
• Plus beads, flares, swages, notches, pierces and end forms to meet all your part specifications