PDF Print E-mail

CUTTING: A CUT ABOVE THE REST

Tube Cutting Expertise

  • All types of tubing, shapes and materials -"Burr-free" parts to exact tolerances
  • End/surface finishes to spec -.010" to 6" diameter tubes with various wall thicknesses
  • All types of end finishes and radii -Prototypes to production runs
  • Cut tolerances as tight as ± .002"
  • Micro-part cutting technology

Supported Shear Tube Cut-Off

  • Shears burr-free parts to tight tolerances with no scrap between cut parts
  • Production rates are thousands of parts per hour, since cut parts roll off the machine ready for shipping Outside diameters up to 7 inches -Lengths as short as .040" long up to 24" inches long
  • Standard length tolerances of ± .005 thousandths of an inch
  • Wall thicknesses range from .010" to inches thick -Speed, accuracy, reliability- Custom fabrication from prototype to production run

Saw and Lathe Cutting Operations

  • Micro parts as small as .010" OD to large diameter Tubing to 5.250" OD
  • Lengths up to 24.000" long. If you require longer parts, call our engineering department to discuss your part specifications
  • Angle cuts to your specifications

Secondary Operations

  • Tumble deburring -End finishing with standard length tolerances as tight as ± .002 thousandths of an inch
  • Chamfering the OD and ID or adding a precise radius
  • Vibratory cleaning -Plus beads, flares, swages, notches, pierces and end forms to meet all your part specifications

ISO 9001:9002
Zero Defects is
the Standard